- 昂捷論壇 (http://m.yzsenyi.com/bbs/index.asp)
-- □-技術研討會 (http://m.yzsenyi.com/bbs/list.asp?boardid=36)
---- SqlServer 2000和2005存儲過程破解 (http://m.yzsenyi.com/bbs/dispbbs.asp?boardid=36&id=7709)
-- 發布時間：2010/9/8 23:46:11
-- SqlServer 2000和2005存儲過程破解
親自測試了一下,發現2k的確實可以破解. sk5的可能需要搞到master表.
原文如下
===========================================================================
SQL Server加密存儲過程用到“WITH ENCRYPTION”參數的時候，就可以將它加密，這種加密方式是不可逆的，再也不能打開了，嗚嗚～那么我們改怎么樣才能看到原來的代碼而不破壞這個存儲過程呢？icech在網上找到了兩個十分十分大牛的人！一個是j9988，早在2004年就寫了一個可以破解加密的存儲過程，支持SQL Server 2000非常的好；另一個是王成輝翻譯老外寫的一個，竟然可以支持SQL Server 2005版本！
如何加密SQL Server存儲過程？
命令如：
CREATE Procedure 存儲過程名(...) WITH ENCRYPTION AS ...
SQLServer2005里使用with encryption選項創建的存儲過程仍然和sqlserver2000里一樣，都是使用XOR進行了的加密。和2000不一樣的是，在2005的系統表syscomments里已經查不到加密過的密文了。要查密文必須使用DAC（專用管理員連接）連接到數據庫后，在系統表 sys.sysobjvalues查詢，該表的列imageval存儲了相應的密文。具體可以使用下面的查詢：
SELECT imageval FROM sys.sysobjvalues WHERE objid = object_id(@procedure) AND
valclass = 1 AND subobjid = 1
針對SQL Server 2000的解密存儲過程
create PROCEDURE sp_decrypt(@objectname varchar(50))
AS
begin
set nocount on
--CSDN：j9988 copyright:2004.07.15
--V3.2
--破解字節不受限制，適用于SQLSERVER2000存儲過程，函數，視圖，觸發器
--修正上一版"視圖觸發器"不能正確解密錯誤
--發現有錯，請E_MAIL：CSDNj9988@tom.com
begin tran
declare @objectname1 varchar(100),@orgvarbin varbinary(8000)
declare @sql1 nvarchar(4000),@sql2 varchar(8000),@sql3 nvarchar(4000),@sql4 nvarchar(4000)
DECLARE @OrigSpText1 nvarchar(4000), @OrigSpText2 nvarchar(4000) , @OrigSpText3 nvarchar(4000), @resultsp nvarchar(4000)
declare @i int,@status int,@type varchar(10),@parentid int
declare @colid int,@n int,@q int,@j int,@k int,@encrypted int,@number int
select @type=xtype,@parentid=parent_obj from sysobjects where id=object_id(@objectname)
create table #temp(number int,colid int,ctext varbinary(8000),encrypted int,status int)
insert #temp SELECT number,colid,ctext,encrypted,status FROM syscomments WHERE id = object_id(@objectname)
select @number=max(number) from #temp
set @k=0
while @k<=@number
begin
if exists(select 1 from syscomments where id=object_id(@objectname) and number=@k)
begin
if @type=\'P\'
set @sql1=(case when @number>1 then \'ALTER PROCEDURE \'+ @objectname +\';\'+rtrim(@k)+\' WITH ENCRYPTION AS \'
else \'ALTER PROCEDURE \'+ @objectname+\' WITH ENCRYPTION AS \'
end)
if @type=\'TR\'
begin
declare @parent_obj varchar(255),@tr_parent_xtype varchar(10)
select @parent_obj=parent_obj from sysobjects where id=object_id(@objectname)
select @tr_parent_xtype=xtype from sysobjects where id=@parent_obj
if @tr_parent_xtype=\'V\'
begin
set @sql1=\'ALTER TRIGGER \'+@objectname+\' ON \'+OBJECT_NAME(@parentid)+\' WITH ENCRYPTION INSTERD OF INSERT AS PRINT 1 \'
end
else
begin
set @sql1=\'ALTER TRIGGER \'+@objectname+\' ON \'+OBJECT_NAME(@parentid)+\' WITH ENCRYPTION FOR INSERT AS PRINT 1 \'
end
end
if @type=\'FN\' or @type=\'TF\' or @type=\'IF\'
set @sql1=(case @type when \'TF\' then
\'ALTER FUNCTION \'+ @objectname+\'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end \'
when \'FN\' then
\'ALTER FUNCTION \'+ @objectname+\'(@a char(1)) returns char(1) with encryption as begin return @a end\'
when \'IF\' then
\'ALTER FUNCTION \'+ @objectname+\'(@a char(1)) returns table with encryption as return select @a as a\'
end)
if @type=\'V\'
set @sql1=\'ALTER VIEW \'+@objectname+\' WITH ENCRYPTION AS SELECT 1 as f\'
set @q=len(@sql1)
set @sql1=@sql1+REPLICATE(\'-\',4000-@q)
select @sql2=REPLICATE(\'-\',8000)
set @sql3=\'exec(@sql1\'
select @colid=max(colid) from #temp where number=@k
set @n=1
while @n<=CEILING(1.0*(@colid-1)/2) and len(@sql3)<=3996
begin
set @sql3=@sql3+\'+@\'
set @n=@n+1
end
set @sql3=@sql3+\')\'
exec sp_executesql @sql3,N\'@sql1 nvarchar(4000),@ varchar(8000)\',@sql1=@sql1,@=@sql2
end
set @k=@k+1
end
set @k=0
while @k<=@number
begin
if exists(select 1 from syscomments where id=object_id(@objectname) and number=@k)
begin
select @colid=max(colid) from #temp where number=@k
set @n=1
while @n<=@colid
begin
select @OrigSpText1=ctext,@encrypted=encrypted,@status=status FROM #temp WHERE colid=@n and number=@k
SET @OrigSpText3=(SELECT ctext FROM syscomments WHERE id=object_id(@objectname) and colid=@n and number=@k)
if @n=1
begin
if @type=\'P\'
SET @OrigSpText2=(case when @number>1 then \'CREATE PROCEDURE \'+ @objectname +\';\'+rtrim(@k)+\' WITH ENCRYPTION AS \'
else \'CREATE PROCEDURE \'+ @objectname +\' WITH ENCRYPTION AS \'
end)
if @type=\'FN\' or @type=\'TF\' or @type=\'IF\'
SET @OrigSpText2=(case @type when \'TF\' then
\'CREATE FUNCTION \'+ @objectname+\'(@a char(1)) returns @b table(a varchar(10)) with encryption as begin insert @b select @a return end \'
when \'FN\' then
\'CREATE FUNCTION \'+ @objectname+\'(@a char(1)) returns char(1) with encryption as begin return @a end\'
when \'IF\' then
\'CREATE FUNCTION \'+ @objectname+\'(@a char(1)) returns table with encryption as return select @a as a\'
end)
if @type=\'TR\'
begin
if @tr_parent_xtype=\'V\'
begin
set @OrigSpText2=\'CREATE TRIGGER \'+@objectname+\' ON \'+OBJECT_NAME(@parentid)+\' WITH ENCRYPTION INSTEAD OF INSERT AS PRINT 1 \'
end
else
begin
set @OrigSpText2=\'CREATE TRIGGER \'+@objectname+\' ON \'+OBJECT_NAME(@parentid)+\' WITH ENCRYPTION FOR INSERT AS PRINT 1 \'
end
end
if @type=\'V\'
set @OrigSpText2=\'CREATE VIEW \'+@objectname+\' WITH ENCRYPTION AS SELECT 1 as f\'
set @q=4000-len(@OrigSpText2)
set @OrigSpText2=@OrigSpText2+REPLICATE(\'-\',@q)
end
else
begin
SET @OrigSpText2=REPLICATE(\'-\', 4000)
end
SET @i=1
SET @resultsp = replicate(N\'A\', (datalength(@OrigSpText1) / 2))
WHILE @i<=datalength(@OrigSpText1)/2
BEGIN
SET @resultsp = stuff(@resultsp, @i, 1, NCHAR(UNICODE(substring(@OrigSpText1, @i, 1)) ^
(UNICODE(substring(@OrigSpText2, @i, 1)) ^
UNICODE(substring(@OrigSpText3, @i, 1)))))
SET @i=@i+1
END
set @orgvarbin=cast(@OrigSpText1 as varbinary(8000))
set @resultsp=(case when @encrypted=1
then @resultsp
else convert(nvarchar(4000),case when @status&2=2 then uncompress(@orgvarbin) else @orgvarbin end)
end)
print @resultsp
set @n=@n+1
end
end
set @k=@k+1
end
drop table #temp
rollback tran
end
-- 發布時間：2010/9/8 23:46:27
--
針對SQL Server 2005的解密存儲過程
create PROCEDURE [dbo].[sp__windbi$decrypt]
(@procedure sysname = NULL, @revfl int = 1)
AS
/*
王成輝翻譯整理，轉貼請注明出自微軟BI開拓者www.windbi.com
目前這個存儲過程只能解密存儲過程，至于解密函數、觸發器、視圖的存儲過程本網站會進一步關注，調用形式為：
exec dbo.sp__windbi$decrypt @procedure,0
如果第二個參數使用1的話，會給出該存儲過程的一些提示。
--版本2.0
*/
SET NOCOUNT ON
IF @revfl = 1
BEGIN
PRINT \'警告：該存儲過程會刪除并重建原始的存儲過程。\'
PRINT \' 在運行該存儲過程之前確保你的數據庫有一個備份。\'
PRINT \' 該存儲過程通常應該運行在產品環境的一個備份的非產品環境下。\'
PRINT \' 為了運行這個存儲過程，將參數@refl的值更改為0。\'
RETURN 0
END
DECLARE @intProcSpace bigint, @t bigint, @maxColID smallint,@intEncrypted
tinyint,@procNameLength int
select @maxColID = max(subobjid),@intEncrypted = imageval FROM
sys.sysobjvalues WHERE objid = object_id(@procedure)
GROUP BY imageval
--select @maxColID as \'Rows in sys.sysobjvalues\'
select @procNameLength = datalength(@procedure) + 29
DECLARE @real_01 nvarchar(max)
DECLARE @fake_01 nvarchar(max)
DECLARE @fake_encrypt_01 nvarchar(max)
DECLARE @real_decrypt_01 nvarchar(max),@real_decrypt_01a nvarchar(max)
declare @objtype varchar(2),@ParentName nvarchar(max)
select @real_decrypt_01a = \'\'
--提取對象的類型如是存儲過程還是函數，如果是觸發器，還要得到其父對象的名稱
select @objtype=type,@parentname=object_name(parent_object_id)
from sys.objects where [object_id]=object_id(@procedure)
-- 從sys.sysobjvalues里提出加密的imageval記錄
SET @real_01=(SELECT top 1 imageval FROM sys.sysobjvalues WHERE objid =
object_id(@procedure) and valclass = 1 order by subobjid)
--創建一個臨時表
create table #output ( [ident] [int] IDENTITY (1, 1) NOT NULL ,
[real_decrypt] NVARCHAR(MAX) )
--開始一個事務，稍后回滾
BEGIN TRAN
--更改原始的存儲過程，用短橫線替換
if @objtype=\'P\'
SET @fake_01=\'ALTER PROCEDURE \'+ @procedure +\' WITH ENCRYPTION AS
\'+REPLICATE(\'-\', 40003 - @procNameLength)
else if @objtype=\'FN\'
SET @fake_01=\'ALTER FUNCTION \'+ @procedure +\'() RETURNS INT WITH ENCRYPTION AS BEGIN RETURN 1
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/ END\'
else if @objtype=\'V\'
SET @fake_01=\'ALTER view \'+ @procedure +\' WITH ENCRYPTION AS select 1 as col
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/\'
else if @objtype=\'TR\'
SET @fake_01=\'ALTER trigger \'+ @procedure +\' ON \'+@parentname+\' WITH ENCRYPTION AFTER INSERT AS RAISERROR (\'\'N\'\',16,10)
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/\'
EXECUTE (@fake_01)
--從sys.sysobjvalues里提出加密的假的
SET @fake_encrypt_01=(SELECT top 1 imageval FROM sys.sysobjvalues WHERE objid =
object_id(@procedure) and valclass = 1 order by subobjid )
if @objtype=\'P\'
SET @fake_01=\'Create PROCEDURE \'+ @procedure +\' WITH ENCRYPTION AS
\'+REPLICATE(\'-\', 40003 - @procNameLength)
else if @objtype=\'FN\'
SET @fake_01=\'CREATE FUNCTION \'+ @procedure +\'() RETURNS INT WITH ENCRYPTION AS BEGIN RETURN 1
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/ END\'
else if @objtype=\'V\'
SET @fake_01=\'Create view \'+ @procedure +\' WITH ENCRYPTION AS select 1 as col
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/\'
else if @objtype=\'TR\'
SET @fake_01=\'Create trigger \'+ @procedure +\' ON \'+@parentname+\' WITH ENCRYPTION AFTER INSERT AS RAISERROR (\'\'N\'\',16,10)
/*\'+REPLICATE(\'*\', datalength(@real_01) /2 - @procNameLength)+\'*/\'
--開始計數
SET @intProcSpace=1
--使用字符填充臨時變量
SET @real_decrypt_01 = replicate(N\'A\', (datalength(@real_01) /2 ))
--循環設置每一個變量，創建真正的變量
--每次一個字節
SET @intProcSpace=1
--如有必要，遍歷每個@real_xx變量并解密
WHILE @intProcSpace<=(datalength(@real_01)/2)
BEGIN
--真的和假的和加密的假的進行異或處理
SET @real_decrypt_01 = stuff(@real_decrypt_01, @intProcSpace, 1,
NCHAR(UNICODE(substring(@real_01, @intProcSpace, 1)) ^
(UNICODE(substring(@fake_01, @intProcSpace, 1)) ^
UNICODE(substring(@fake_encrypt_01, @intProcSpace, 1)))))
SET @intProcSpace=@intProcSpace+1
END
--通過sp_helptext邏輯向表#output里插入變量
insert #output (real_decrypt) select @real_decrypt_01
-- select real_decrypt AS \'#output chek\' from #output --測試
-- -------------------------------------
--開始從sp_helptext提取
-- -------------------------------------
declare @dbname sysname
,@BlankSpaceAdded int
,@BasePos int
,@CurrentPos int
,@TextLength int
,@LineId int
,@AddOnLen int
,@LFCR int --回車換行的長度
,@DefinedLength int
,@SyscomText nvarchar(4000)
,@Line nvarchar(255)
Select @DefinedLength = 255
SELECT @BlankSpaceAdded = 0 --跟蹤行結束的空格。注意Len函數忽略了多余的空格
CREATE TABLE #CommentText
(LineId int
,Text nvarchar(255) collate database_default)
--使用#output代替sys.sysobjvalues
DECLARE ms_crs_syscom CURSOR LOCAL
FOR SELECT real_decrypt from #output
ORDER BY ident
FOR READ ONLY
--獲取文本
SELECT @LFCR = 2
SELECT @LineId = 1
OPEN ms_crs_syscom
FETCH NEXT FROM ms_crs_syscom into @SyscomText
WHILE @@fetch_status >= 0
BEGIN
SELECT @BasePos = 1
SELECT @CurrentPos = 1
SELECT @TextLength = LEN(@SyscomText)
WHILE @CurrentPos != 0
BEGIN
--通過回車查找行的結束
SELECT @CurrentPos = CHARINDEX(char(13)+char(10), @SyscomText,
@BasePos)
--如果找到回車
IF @CurrentPos != 0
BEGIN
--如果@Lines的長度的新值比設置的大就插入@Lines目前的內容并繼續
While (isnull(LEN(@Line),0) + @BlankSpaceAdded +
@CurrentPos-@BasePos + @LFCR) > @DefinedLength
BEGIN
SELECT @AddOnLen = @DefinedLength-(isnull(LEN(@Line),0) +
@BlankSpaceAdded)
INSERT #CommentText VALUES
( @LineId,
isnull(@Line, N\'\') + isnull(SUBSTRING(@SyscomText,
@BasePos, @AddOnLen), N\'\'))
SELECT @Line = NULL, @LineId = @LineId + 1,
@BasePos = @BasePos + @AddOnLen, @BlankSpaceAdded = 0
END
SELECT @Line = isnull(@Line, N\'\') +
isnull(SUBSTRING(@SyscomText, @BasePos, @CurrentPos-@BasePos + @LFCR), N\'\')
SELECT @BasePos = @CurrentPos+2
INSERT #CommentText VALUES( @LineId, @Line )
SELECT @LineId = @LineId + 1
SELECT @Line = NULL
END
ELSE
--如果回車沒找到
BEGIN
IF @BasePos <= @TextLength
BEGIN
--如果@Lines長度的新值大于定義的長度
While (isnull(LEN(@Line),0) + @BlankSpaceAdded +
@TextLength-@BasePos+1 ) > @DefinedLength
BEGIN
SELECT @AddOnLen = @DefinedLength -
(isnull(LEN(@Line),0) + @BlankSpaceAdded)
INSERT #CommentText VALUES
( @LineId,
isnull(@Line, N\'\') + isnull(SUBSTRING(@SyscomText,
@BasePos, @AddOnLen), N\'\'))
SELECT @Line = NULL, @LineId = @LineId + 1,
@BasePos = @BasePos + @AddOnLen, @BlankSpaceAdded =
0
END
SELECT @Line = isnull(@Line, N\'\') +
isnull(SUBSTRING(@SyscomText, @BasePos, @TextLength-@BasePos+1 ), N\'\')
if LEN(@Line) < @DefinedLength and charindex(\' \',
@SyscomText, @TextLength+1 ) > 0
BEGIN
SELECT @Line = @Line + \' \', @BlankSpaceAdded = 1
END
END
END
END
FETCH NEXT FROM ms_crs_syscom into @SyscomText
END
IF @Line is NOT NULL
INSERT #CommentText VALUES( @LineId, @Line )
select Text from #CommentText order by LineId
CLOSE ms_crs_syscom
DEALLOCATE ms_crs_syscom
DROP TABLE #CommentText
-- -------------------------------------
--結束從sp_helptext提取
-- -------------------------------------
--刪除用短橫線創建的存儲過程并重建原始的存儲過程
ROLLBACK TRAN
DROP TABLE #output
| 下載信息 [文件大小： 下載次數： ] | |
 點擊瀏覽該文件:t-sql破解加密的存儲過程.rar |